Stainless Steel Bollard Covers – Look At This Post..

Creating harmony in the midst of heavy foot or vehicle traffic is quite tough, particularly if you own a commercial building. This is often an issue in shopping centers, restaurants, or other crowded places, which is the reason certain regulations are necessary for a more organised operation. But besides these rules, it is also essential that you give people some visual signs of what these rules are, as stainless-steel bollards so people will be made aware that there are rules to be followed.

Bollards in Public Places – Bollards are commonly found in public places, and you could find parking bollards in streets with heavy traffic or before buildings that need protection from vehicles. Some are even used rather than cycle racks. Others would even allow these bikes to be locked for security purposes.

When bollards are installed, it is actually mainly to strengthen security and safety. They are visual indicators that no unauthorised individual is permitted to enter a place, which can be often signified with the addition of a chain connecting the bollards. This means that people are not allowed to get into the region that is cordoned with bollards.

All steel bollards are galvanised to BS EN ISO 1461 and possess the choice of powder coating to any BS or RAL colour. Mild steel tube is available in varying thicknesses 60mm up to 114mm diameter use a 3mm thick wall. Diameters above this are 5mm thick as standard. Mild steel tube is available in larger wall thicknesses to offer the greatest safety barriers.

Of very low maintenance, steel requires only occasional cleaning with warm water and soap or perhaps a mild detergent. In heavy industrial areas or regions of a very high volume of traffic bollards might be susceptible to more deposits, in order to retain the desired finish a much more frequent maintenance programme is suggested. Stainless Steel Bollard Covers

Areas requiring vehicle access throughout the day and need a secure and safe area at nighttime can utilise a telescopic bollard. The bollards possess a light lifting weight, approximately 15kgs, and retract to ground level making it possible for continued vehicle access. When the bollard is lifted and locked in put it provides high security to the area, this design can be manufactured in a thicker steel wall to supply anti ram resistance.

There are numerous materials employed to make bollards. It can be stone, concrete or steel. Concrete bollards are permanently installed while steel bollards are available with extra features, like being sound sensitive or automated. Fixed bollards have light reflectors to let people know where they may be located, specially the drivers. With no reflectors, they could easily cause accidents to occur within the streets.

Installing bollards, whether they are used as a substitute for a bike stand or otherwise not, depends on which kind of bollards you have chosen. Fixed bollards must be installed into concrete or with new foundations. Factors miecfq as the soil condition and design need to be carefully examined in the beginning.

On the other hand, removable or manufactured bollards often include their mounting systems. Even should they have to become mounted on their own, no drilling is important to install these types of bollards. They don’t must be glued to the ground either with epoxy or similar materials.

Retractable bollards are also available. At first glance, they may appear to be layered telescopes which you can use with manual or automatic features, depending on your choice. Manual bollards need to be lifted with the aid of lift-assistance mechanisms while automated bollards use hydraulics and electricity.

Leave a Reply

Your email address will not be published. Required fields are marked *